[SƯU TẦM] hướng dẫn cách nhập code cho all mobile









1.Blackberry

Trích:





How to enter my Unlock Code on BlackBerry?
Model : BlackBerry 8700
Go to the Menu -> Options -> Advanced Options -> Sim card
press select, while holding the Shift key (bottom right corner CAPS),
type mepd. You should now see the five locking categories listed, while
holding the alt key, type mep2. Release the alt key. You are now
prompted to enter the Network MEP code. Enter the code, enter
Return/Enter, the device should then be unlocked.
Model : BlackBerry 8800
***** You must have a SIM card in your phone to complete these
steps ( Can be active or inactive ) *****
1 - Go to settings menu => and then Options
2 - Select Advanced options => and then Sim card
3 - Type MEPD using your Blackberry keyboard (NOTE: You will not
see any text appear on the screen while typing MEPD)
4 - Hold the ALT Key while typing in MEPE on your Blackberry
keyboard (NOTE: You will not see any text appear on the screen while
typing MEPD)
5 - You should be presented with a prompt "Enter Network MEP
Code". Type in the 16 digit unlock code received from UnlockBase.com and
press in the track wheel / jog dial to confirm
6 - Your phone is now unlocked
Model : BlackBerry 8100 Pearl
1 - Go to Options Menu => Advanced Options
2 - In the SIM Card menu, hold down the shift (right of the zero,
cap) press meppd
3 - You'll see the unlocking level screen there you hold the ALT
key (left side below @) type mepp2
4 - Enter the unlock code.

Model : BlackBerry 8100 (Vodafone Australia)
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY
UNLOCK PROCESS
This procedure unlocks the handset from being network restricted
from only using SIM cards from Vodafone Australia. In case of
difficulties, please refer to the FAQ listed below
1. Take note of the unlocking code shown above
2. Insert a Non-Vodafone Australia working SIM card.
3. Ensure the phone is charged and then switch the phone on.
4. Optional Step: If the SIM card has a PIN, enter your PIN
number. (See FAQ below)
5. The phone will then display a message. The most common is
“Invalid SIM card”. (Different message? See FAQ below)
6. Select “Turn Wireless Off”
7. Select “Settings” Menu , then go to Advanced Options > SIM
Card
8. Type alt-MEPT by holding the ALT-key and typing the letters
MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY}
9. When prompted with “Enter Network MEP code (255 left)” on the
screen, enter the 16-digit network unlock code provided for your phone,
then press Enter. (Unlocking code is shown above)
10. Reset the phone by pulling the battery
11. Switch the phone on and the handset will be unlocked
automatically. This will be confirmed if you can make and receive calls
with the Non-Vodafone Australia SIM card. (You will need reception and
phone credit with the different network provider)
Please Note:
If the unlocking code is entered incorrectly the next attempt to
unlock the device will be delayed for 10 seconds increments. The number
of unlocking attempts is limited to 255 tries only. When 255 attempts is
reached the phone will be permanently blocked.
To unblock the phone, it must be taken to a RIM service centre. No
outgoing calls including emergency call is possible when the phone is
blocked.
FAQ:
Question: My phone asks to enter a PIN number
Answer: For SIM cards with PIN ENBLED you will be required to
enter a PIN. This is not the unlocking code that has just been provided.
For information concerning the PIN, PIN2, PUK and PUK2 codes for a SIM
card please read the manual that came with your phone. This is not a
handset unlocking difficulty.
Question: My handset displays a different message then what is
shown in this procedure when I insert a Non Vodafone Australia SIM card.
Answer: The most common message the phone will display is “Invalid
SIM card”. Because each handset may have a different variation in
software there is no common message. If your handset displays a
different message it is recommended to move onto the next step. Note:
Faulty SIM Cards - The handset may also display messages indicating the
SIM you are using to unlock the handset is faulty, it could display
“Insert SIM” “Bad Card”, “Card Error” or “Card Rejected”, confirm the
SIM card is inserted correctly – Gold area downwards and the cut of the
corner matches correctly. You will need a working Non Vodafone SIM card
to unlock the handset, Vodafone can not assists with other networks
faulty SIMs.
Question: I am outside of Australia and experiencing difficulties
unlocking the phone that I purchased from a Vodafone Australia outlet
Answer: Clearly note this in the difficulties description.
Vodafone Australia can only send a reply to the difficulty by email.

Model : All BlackBerry
1 - Using the menu go to Settings Menu -> SIM card pressselect.
2 - While holding the SHIFT key, type mepd
3 - You should now see the five locking categories listed.
4 - While holding the SHIFT KEY, type mep2.
5 - Release the shift key.
6 - You are now prompted to enter the Network MEP code (it will
also state how many attempts left)
7 - Enter the code
8 - Enter Return/Enter
9 - The device should then be unlocked

2.Alcatel

Trích:





Master Codes
- 25228352
- 25228353
- 83227423 (TH3/4,BH4,BF5,BG3,BF3/4..)
###337*07# - master reset (with SIM)
###847# - factory reset (with SIM)
Alcatel 835 formating - **0102#

How to enter my Unlock Code on Alcatel?
Model : Method Generic
1 - Switch ON your phone without SIM Card,
2 - Then compose : *#0000*CODE#,
3 - To finish compose : *#0001*CODE#.
Model : 531 & 535
1 - Switch ON your phone without SIM Card,
2 - Press * and without release compose 787292,
3 - A new menu "Unlock Network" will appear, then select "YES",
4 - Enter the Code we send to you.
Model : All other Alcatel
1 - Switch on your phone with a not allowed SIM Card,
2 - When the message "Enter Network Key" appear enter the Code we
send to you

If the phone does NOT ask for the unlock code when you put in another
simcard
you can enter the NCK in the following way:
###765*08#YOUR CODE.

3.Benq


Trích:

1 - Switch ON your phone with a not allowed SIM Card, 2 - Enter the Unlock Code .

4.Blackjack

Trích:





How to enter my Unlock Code on Cingular BlackJack ?
Insert disallowed simcard (a simcard that the phone does not usaully
accept) and enter unlock codes when prompted
NOTE: If you are unable to connect to service provider or unable
to make out going calls or recieve messages, this has nothing to do with
your phone being locked or not, you need to force the BlackJack to
change to GSM mode, this can be done as follows:
Power on your Phone
1. Enter *#1546792*#
2. Select Option 3 Network & Call Settings
3. Select option 5 Network Mode
4. Select GSM
This should resolve your problem.

5.Bosch

Trích:

How to enter my Unlock Code on Bosch? Model : All Bosch 1 - Switch on your phone with a not allowed SIM Card, 2 - When the message "Enter Network Key" appear enter the Code we send to you.

6.Dream phone

Trích:





How to enter my Unlock Code - DREAMPHONE - ?

Model : G500i
- Without sim card compose ####74656256 then green boutton
- wait 5s phone will ask for code.
- Enter Code

7.Sony Ericsson

Trích:





How to enter my Unlock Code on Ericsson?
Model : All Ericsson
1 - Switch ON your phone without SIM Card,
2 - Press 1 time the left arrow,
3 - Press 2 times the button * ,
4 - Press 1 time the left arrow,
5 - The message "Personalize with MNC2" will appear,
6 - You can now enter the Unlock Code we send to you.

How to enter my Unlock Code on SonyEricsson ?
Model : All SonyEricsson
1 - Switch ON your phone without SIM Card,
2 - Press 1 time the left arrow,
3 - Press 2 times the button * ,
4 - Press 1 time the left arrow,
5 - The message "Personalize with MNC2" will appear,
6 - You can now enter the Unlock Code we send to you.
If your phone have a "JOGDIAL" (ex : SonyEricsson K700i) you must
press "down arrow" instead of
"left arrow" for step 2 & 3. We mean by "Down Arrow" to direct
the Jogdial down !

W950 And Others Scrool Models
Service Menu (* up * down down * down *)
Code Menu (* up * down ** down (up/down using the jog dial on the
side)
( side, down,**,down )

8.Fly bird

Trích:

S688 - #*301#02# send - with SIM menu: 7 - 10 - ok, #*8000#, #*3676# (reboot repair) V09, S1180 - *, 3 times down, 3 times up - service menu

9.Handspring

Trích:





How to enter my Unlock Code - Handspring - ?
model : Treo 180 & 270
without sim card compose : *#*# unlock Code #

10.HP ipaq

Trích:





HP iPaq Unlock Code Entry Instructions How to Enter Unlock Codes
on HP iPaq series phones (iPaq 6315, 6325, 6300, 6515 , etc) Step Action
1 Insert NON Cingular SIM into device
2 Power on the device
- Wait approximately 30 seconds until the SimLock application appears
(the delay may be longer if the user has already attempted an unlock
with the wrong code)
3 Enter the unlock code in the blank field
4 Press Ok
- If the unlock code is incorrect, an error dialog will appear. After
pressing Ok on this dialog, the user has to re-enter the unlock code
after delays (see above in Device Specific Information)
- If the unlock code is correct, a success dialog will appear.
5 Press Ok
- The device is now unlocked and should continue booting OR
1. On the Today screen, tap Start > Settings.
2. Tap the Phone Band icon.
3. Tap the Keyboard icon to open the virtual keyboard
4. Tap Shift and then Ctl key to enable the keys.
5. Tap the blank area below the band selection box to open the unlock
tool.
6. Tap Shift and then Ctl to disable the keys.
7. Enter the 8-digit unlock code and tap OK when done.
8. Wait for the device to validate the unlock code (about five
seconds). You will see one of the following screens:
1) Unlock successful.
2) Unlock failed due to incorrect code. The user has three attempts
to unlock. After three attempts, the device will refuse any more
unlocking attempts. Perform a soft reset to reset the counter to perform
additional unlocking attempts.
3) Device is not ready for unlocking. This error message displays
when the user tries to unlock when the phone application (not the
device) is not in a steady state. It takes 30 seconds after powering on
the phone for it to reach a steady state.
*If you already have an unlock code and sim card but when you input
code, it always says " unlock code not accepted, you have tried...." You
must update your ROM version . About 5% hp 6315 have this problem.
This problem can easy be resolved with this ROM update ( ROM v1.00.38
)
This rom update will remove all T-mobile logos and sofware and your
6315 will become OEM 6315
dowload here : http://www.allgsmunlock.com/download...29760_6315.zip
1. Unzip/Extract it using your unzip program (i.e. WinRAR, WinZip,
7zip, etc...)
2. Place the h6315 in cradle. connect it to USB and charger
3. Double click on the hpRUU.exe to run the program
4. View the Readme and if you wish to proceed Agree to the Terms and
Conditions
5. Click Next
6. Click Next again to flash the device with the new ROM

11.Huawai

Trích:

MASTER SECURITY CODE -309296 -3092 -9296

12.Kenwood

Trích:





How to enter my Unlock Code - KenWood - ?
Model : all
- Switch ON your phone with a not ACCEPTE SIM Card,
- Enter the Unlock Code .

13.LG

Trích:

2945#*# - service menu (code reset)(W3000 G5300 C1200 G7100...) 2945#(*)- hold (LG 500,600) B1200 *+pwr, 6,6,8 Service Menu B1300 *+pwr, 1,5,9 Service Menu Security Removing Code For Lg 8110,8120. 47328545454# Or 277634#*# How to enter my Unlock Code on LG Electronics ? Model : LG KU990 Viewty 1. insert original sim card and turn phone on. 2. Press telephone icon at bottom of screen to bring up the phone keypad 3. Enter 2945#*990# 4. A menu will pop up, select sim unlock 5. Enter your unlock code and press ok 6. The phone will then reboot and the unlock is complete. Model : LG CU400 1 - Insert SIM Card from a unsupported network provider, 2 - Power on the handset, 3 - Phone will display "Invalid SmartChip" 4 - In Idle screen, enter : 159753#*# 5 - Phone will display "Enter NCK, Remaining 5" 6 - Enter the 8 digit SIM Unlock code 7 - Select "OK" 8 - The handset is now successfully unlocked Model : LG U8150 1 - Switch ON your phone with a NOT Allowed SIM Card, 2 - Compose : 2, 7, 7, 6, 3, 4, #, *, #, 3 - Go to menu "SIM Lock", 4 - Enter the Unlock Code we send to you. Model : LG U400 1. Insert the network SIM in the handset which has given u the LG U400. 2. Enter 2945#*88110#. 3. The phone will then prompt 'Unlock sim'. Press OK. 4. The phone will then prompt 'Network Unlock'. Press OK. 5. The phone will then prompt- 'Input Network Control Key'. Enter the 8 digit unlocking code. Press OK. If the unlocking code comes with only 7 digits, add a 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digit code. 6. It should give you the message Success. 7. Come back to the main screen and Enter 2945#*88110#. 8. The phone will then prompt unlock sim. Press OK. 9. The phone will then prompt Network Unlock/ Lock but if you scroll down you will see a message Enter SP Lock. Enter SP Code. 10. Then press OK Model : All other model 1 - Switch ON your phone with an Allowed SIM Card, 2 - Then compose : 2945#*5101# - (if you have a LG 510w) 1945#*5101# - (if you have a LG 1200 & B1200) 2945#*5221# - (if you have a LG 5200 & 52200) 2945#*5301# - (if you have a LG 5300) 2945#*5401# - (if you have a LG 5400) 2945#*70001# - (if you have a LG 7020) 2945#*7101# - (if you have a LG 7100) 2945#*1201# or 2945#*70001# - (if you have a LG 1100) 2945#*70001# - (if you have a LG7250T) 2945#*2201# - (if you have a LG C2200) 2945#*5301# - (if you have a LG T5100) 2945#*3311# - (if you have a LG C3310) 3 - Go to "Menu" and then to "Settings", 4 - Then select "Security", 5 - To finish select "Network Provider" and select "Desactivate" 6 - Enter the Unlock Code we send to you. Model : To Classify For the next models u must to insert the original SIM: LG C3100 press 2945#*3101# LG C3380 press 2945#*7101# LG F2300 press 2945#*7101# LG KE260 press 2945#*2601# LG KE970 press 2945#*9701# LG KG120 press 2945#*1201# LG KG220 press 2945#*1201# LG KG240 press 2945#*3311# LG KG280 press 2945#*7101# LG KG290 press 2945#*7101# LG KG800 press 2945#*7101# LG KU250 press 2945#*250# LG KU380 press 2945#*380# After that will appear an secret menu,go to settings-security- sim lock ,enter NCK and press OK. For next models insert one SIM ,not the original SIM: LG KU311 press 815118#*# LG KU800 press 82652#*# LG L600v press 815118#*# LG U8150 press 277634#*# LG U8210 press 277634#*# LG U8500 press 277634#*# Enter NCK and press OK.

14.Maxon

Trích:





*#9922# - menu, reset (without SIM)
*#9900# - Software Version
*#9901# - Software Version (PBatch)

15.Mitubishi

Trích:





*65512890 (*-hold) format FFS (Eclipse)
* 3926 - (*-hold) test mode
* 5806 - (*-hold) SW version
*(hold) 787090 - trium 320 unlock menu

How to enter my Unlock Code on Mitsubishi ?
Model : Trium Mars
1 - Swith ON your phone without SIM Card,
2 - Press * and without release compose : 787090 or 787292,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.
Model : Mitsubishi M341i
1 - Swith ON your phone with an Accepted SIM Card,
2 - Press * and without release compose : 787292,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.
Model : Mitsubishi M342i
1 - Swith ON your phone with an Accepted SIM Card,
2 - Press * and without release compose : 787090,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.
Model : All Mitsubishi
1 - Switch ON your phone without SIM Card,
2 - Press * and without release compose : 787292 or 78729,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.


hold * 476989 NS Lock Menu
hold * 482896 CP Lock Menu
hold * 574243 NS Lock Menu
hold * 967678 SP Lock Menu
hold * 362628 IMSI Lock Menu
hold * 787090 Lock net.level
hold * 787292 Lock net.level
hold * 3926 Shut Down...
*#0048# fast change polish langpack
*0000# automatic language
*850696 Warmstart
Eclipse:
hold * 65512890 eeprom reset - cure for hangs ect.

16.Motorola

Trích:

(T190, T191, T205) master code - 19980722 - 20010903 ********** P2K test menu: *#06#, menu, menu, 048263* Test comands: 32*116*1*0*0 - read phone code 32*118*1*0*0 - read security code 18*0 - factory reset, phone code off 18*1 - master reset 54*18*1 - full phone reset 10*0*6 - select 900/1800 32*279*1*0*8 - model 32*383*1*0*0 - flex version Hard reset MPX200, MPX220 - blue button + power on

17.Nec

Trích:





How to enter my Unlock Code on NEC ?
Model : Nec N342i
1 - Switch ON your phone without SIM Card,
2 - Compose : **00012*CODE#.
Model : All others NEC
1 - Switch ON your phone without SIM Card,
2 - Compose : #7320*CODE#.
Model : old NEC
1 - Switch ON your phone without SIM Card,
2 - Compose : #3210*CODE# and press Call Button.

18.Nokia

Trích:





How to enter my Unlock Code on Nokia ?
Model : All Nokia
1 - Switch ON your phone without SIM Card,
2 - Compose #PW+CODE+1#
The letter P appear after press 3 times quickly the button star ( * )
The letter W appear after press 4 times quickly the button star ( * )
The letter + appear after press 2 times quickly the button star ( * )
3 - The phone show "SIM Restriction Off" and was unlocked !

19.Palmone

Trích:





PalmOne:
Treo 600 / 650
1. Power on phone with a non-cingular sim inserted
2. When phone is powered up dial any number, it will ask you if you
want to turn phone on, click yes
3. It will say "your phone cannot be used with this SIM card" click
ok
4. It will say "Network Search" click cancel
5. using the dial pad do the following: enter *#*#code# then press
dial on the screen.
6. It will say the sim lock has been removed from your phone
Treo 680
Power on with non-cingular sim
It will then say "Your phone cannot be used with this SIM card"
Click ok
Click dialpad tab, bottom of the screen far left
Using stylus type *#*#code#
Press the green button
It will then say The SIM Lock has been removed from the phone"
Treo 750
Power on with NON-Cingular sim
Using onscreen keyboard enter unlock code

20.Panaonic

Trích:





*01763*737381# - master reset (user data, user code) A100, A101,
A102,G50, G51, G70, GD55..
*369#(*) - MENU
7, 4, 6, menu, menu - lock menu
*#9999# - 5 sec after power on - SW version (GD75, GD67, GD87..)
How to enter my Unlock Code on Panasonic ?
Model : Panasonic GD67/68 & GD87/88 & x70 & P341i
1 - Switch ON your phone without SIM Card,
2 - Compose : 746 and press 2 times the button "OK",
3 - A new menu will appear, select "NCK",
4 - You can now enter the Unlock Code we send to you.
Mode : Panasonic G60
1 - Switch ON your Phone with a not allowed Accepted SIM Card
2 - Enter your PIN Code and Confirm
3 - Press a second time on OK button
4 - The phone now ask for Unlock Code !
Model : Panasonic GD50 & GD55
1 - Switch ON your phone without SIM Card,
2 - Compose : **00012*CODE#.
Model : Panasonic X60 & X400
1 - Switch ON your phone with an Accepted SIM Card,
2 - Compose : 52824**,
3 - A new menu will appear, select "NCK",
4 - You can now enter the Unlock Code we send to you.
or
1 - Switch ON your phone with an Accepted SIM Card,
2 - Compose : 52824**,
3 - Compose : 746 and press 2 times the button "OK",
4 - A new menu will appear, select "NCK",
5 - You can now enter the Unlock Code we send to you.
Model : Panasonic X100
1 - Switch ON your phone with an Accepted SIM Card,
2 - Compose : #*7465625*638*CODE#

21.Pantech

Trích:

*01763*737381# - master reset (user data, user code) without SIM *01763*8371# - SW version *01763*6371# - UNLOCK *01763*3641# - Menu

22.Philips

Trích:





#20021208# ok - 630 without SIM (erase flash)
*#7728*# - RSAV DONE
*#3849*# - ??? reboot
*#3851*# - ??? reboot
Philips 568 *01763*737381# - reset
How to enter my Unlock Code on Philips ?
Model : All Philips
1 - Switch ON your phone with a not Accepted SIM Card,
2 - Phone ask for "Enter NCK",
3 - You can now enter the Unlock Code we send to you.

23.Sagem

Trích:





How to enter my Unlock Code on Sagem ?
Model : Sagem My-S7
1 - Switch ON your phone without SIM Card,
2 - Compose : *#*#CODE# and press "Call" button.
Model : All Sagem
1 - Switch ON your phone with a not Allowed SIM Card,
2 - Phone will show "SIM VERROU"
3 - You can now enter the Unlock Code we send to you.
WARNING : if your mobile show "CODE POSTE" it's because you have a
Security Code, can be 0000 or 1234 but we can't calculate this code with
your IMEI because it's not code from Phone but code from the User of
the Phone !

0000 or 1234 but we can't calculate this code with your IMEI because
it's not code from Phone but code from the User of the Phone

24.Samsung

Trích:





*2767*3855# - FULL E2P RESET
*2767*2878# - CUSTOM E2P RESET
#*7337# - UNLOCK
*2767*688# - UNLOCK
*#0523# - CONTRAST
*#9998*523# - CONTRAST
*#8999*8378# - Service Menu (X100

How to enter my Unlock Code on Samsung ?
Model : Samsung Z105 & Z107
1 - Switch ON your phone with a not Accepted SIM Card,
2 - Compose : #7465625*638*CODE#
Model : All others Samsung
1 - Switch ON your phone with a not Accepted SIM Card,
2 - Phone will ask for "Password",
3 - You can now enter the Unlock Code we send to you.
OR (if phone show "Insert Correct SIM Card")
1 - Switch ON your phone with a not Accepted SIM Card,
2 - Compose : #0111*CODE#

For Phone Freeze
Enter "unlock code2" WITH simcard inside the phone when
"Phone Freeze" warning is displayed
(no entered digits will be displayed).

25.Sanyo

Trích:

How to enter my Unlock Code on Sanyo ? Model : All Sanyo 1 - Switch ON your phone with a not Allowed SIM Card, 2 - Enter the Unlock Code we send to you.

26.Sendo x1 format

Trích:

5 + power on

27.Sendo

Trích:





How to enter my Unlock Code on Sendo ?
Model : All Sendo
1 - Switch ON your phone with a not allowed SIM Card,
2 - Message "Enter NCK" will appear,
3 - You can now enter the Unlock Code we send to you.

28.Sharp

Trích:





How to enter my Unlock Code on Sharp ?
Model : All Sharp
01 - From front screen type *01763*6371#
02 - The handset will reset back to the main screen
03 - Press M button.
04 - Scroll to Settings and press SELECT.
05 - Scroll to Security and press SELECT.
06 - Scroll to MEP locks and press SELECT.
07 - Enter your Handset Code (the default code is 0000) and press OK.
08 - Scroll to Network and press SELECT.
09 - Scroll to Deactivate and press SELECT.
10 - Enter Unlock Code we send to you and press OK.
11 - Handset should then display DONE and be unlocked.



for 2G sharp phones(some of them works on 3G also)

*01763*278257# Assert Fail Log clear
*01763*2783771#
*01763*2783772#
*01763*2783773#
*01763*2783774#
*01763*2783775#
*01763*3640# disable Engineering Mode
*01763*3641# enable Engineering Mode
*01763*4634# IMEI
*01763*5640# disable LOG
*01763*5641# enable LOG
*01763*6365641#
*01763*6370# disable MEP menue (unlock menue)
*01763*6371# enable MEP menue (unlock menue)
*01763*63866330# disable NetMode
*01763*63866331# enable NetMode
*01763*753371# Sleep Check
*01763*8371# Firmware Version
*01763*8781# Test #1
*01763*8782# Test #2
*01763*8783# Test #3
*01763*8784# Test #4
*01763*8785# Test #5
*01763*8786# Test #6
*01763*8787# Test #7
*01763*87870# Test #70
*01763*87871# Test #71
*01763*87872# Test #72
*01763*87873# Test #73
*01763*87874# Test #74
*01763*8788# Test #8
*01763*87891#
*01763*87892#

29.Siemens

Trích:

How to enter my Unlock Code on Siemens ? Model : All Siemens 1 - Switch ON your phone with a not Allowed SIM Card, 2 - Compose : *#0000*CODE# or 1 - Switch ON your phone with a not Allowed SIM Card, 2 - Compose : *#0001*CODE#

30.SPV

Trích:

How to enter my Unlock Code on SPV ? Model : All SPV 1 - Switch ON mobile with a not Allowed SIM Card, 2 - Enter Unlock Code we send to you. Model : SPV C500 1 - Switch ON mobile with a not Allowed SIM Card, 2 - The message "PUK2" appear, 3 - Enter the Unlock Code we send to you. 4 - Phone ASK for New Code PIN enter : 0000 5 - Confirm and compose : 0000** 6 - Click "Finish" and phone will show "Network is locked..." 7 - Enter the Unlock Code we send to you and click "Finish" 8 - Restart the Mobile who is Unlocked

31.T mobile Sicdkick 1 2 3

Trích:





Unlock Information for T-Mobile Sidekick 1 2 3:
HOW YOU CAN UNLOCK TO BYPASS THE 3 DIGIT PASSWORD LOCK
Go Privacy Lock. (you can assign a privacy code for access to your
device: from the jump screen, select Settings, then Key Guard &
Security and scroll down to Privacy Lock.)
Then press menu + jump, to go to emergency call.
Then, hold jump button + shift + s
Then you should see Traces messages appeared on your screen.
Then just press back button.
YOU ARE DONE. U HAVE NOW BYPASSED THE 3 DIGIT PASSWORD LOCK

32.Toshiba

Trích:





How to enter my Unlock Code on Toshiba ?
Model : All Toshiba
1 - Switch ON your phone with a not Accepted SIM Card,
2 - Enter the Unlock Code we send to you.
OR
1. Insert Non Vodafone SIM into the handset and power on.
2. The display will show Enter Network Unlock Code.
3. Enter **00012* then 47369761 followed by #, then press the centre
menu key.
4. The display will now show Done.
5. Switch the phone off and on. The phone will now be unlocked
TS803 :
1. Insert Non Vodafone SIM into the handset and power on.
2. The display will show SIM Error. This SIM card cannot be used
3. Press the centre menu key for 3-4 seconds. The display will show
Enter Code
4. Enter unlock code
5. The handset will then reboot itself. Once completed, the handset
will be unlocked

33.Vk mobile

Trích:

*#79# - SW version *#85*364# (*) - hold menu 855855# without SIM (VG107) 85558555#(*)-hold 4268#(*)-hold (VG207)

34.Vital

Trích:

How to enter my Unlock Code on Vitel ? Model : All Vitel 1 - Switch ON your phone with a not allowed SIM Card, 2 - Enter the Unlock Code we send to you. Model: TSM7 1 - Switch ON your phone without SIM Card, 2 - Enter the Code ##**9987, 3 - The phone now ask for Unlock Code.

35.Vk

Trích:

How to enter my Unlock Code on VK Mobile ? Model : VK530 1 - Switch the handset ON without SIM Card - screen will display Insert Card. 2 - Compose : *#83*737# (press and hold # for 1 sec) - this will give access to the personalisation menu 3 - Select Disable Personalisation 4 - Type Unlock Code we send to you and press the ok button 5 - Handset should now be unlocked

36.Voxtel

Trích:

0124 - master code

Trích:

0718#(*)- hold - menu (ST11, SC10, V100 without SIM) 4268#(*)- hold - show code (ST11, SC10 without SIM) *789(#)- hold - menu (V50, V300, RX100 without SIM

37.Wonu

Trích:





How to enter my Unlock Code on Wonu ?
Model : All Wonu
1 - Switch ON your phone with a not Allowed SIM Card,
2 - Enter the Unlock Code we send to you

mong máy bác dừng chọt nha
nếu thấy co ích thì thanks scho em phát nha